Skilled Trade and Artisan Jobs in Nigeria 2026-2027: Latest Vacancies & Application Procedures

Skilled trade and artisan jobs are practical occupations that require technical knowledge, vocational training and practical competence. Those that wish to get any skilled Trade or artisan job in Nigeria need to have some level of apprenticeship experience and skills.

Occupations in skilled Trade and technical industries within Nigeria include electricians, welders, plumbers, mechanics, carpenters, tilers, refrigeration technicians, fabricators and other technical workers.

Nigeria’s formal skills development system increasingly recognise practical competence through the National Skills Qualifications (NSQ) and the National Skills Qualifications Framework (NSQF). Currently, the National Board for Technical Education (NBTE) lists 133 approved occupational standards across 9 sectors in Nigeria. This demonstrate a wide range of recognised practical trades in Nigeria.

Current Verified Skilled Trade and Artisan Job Vacancies

The following vacancies were verified on October 2026. Applicants should verify the vacancy status against the vacancy page on the official application page before applying, as employers may close positions without any notice.

1. Electrician – B2C

  • Employer: Premium Edible Oil Products Limited, a subsidiary of Flour Mills of Nigeria Plc
  • Location: Ibadan, Oyo State
    Employment: Not stipulated on the official vacancy page
  • Salary: Not stated
  • Posted: October 1, 2026
  • Closing date: Not specified
  • Application: Apply through the official FMN recruitment portal.

Key responsibilities:

  • Inspect electrical and automation control panels.
  • Perform scheduled preventive maintenance.
  • Check electrical parameters and heating panels.
  • Respond to electrical and automation faults.
  • Maintain electrical equipment and machinery.
  • Record maintenance activities and report faults to the supervisor.

Requirements:

  • Five credits in WAEC, NABTEB or Trade Test 1.
  • OND is an added advantage.
  • At least two years’ relevant experience, preferably in manufacturing, production or FMCG.
  • Good teamwork, communication, organisation and accountability.

2. Welder – B2C

  • Employer: Premium Edible Oil Products Limited – Flour Mills of Nigeria Plc
  • Location: Ibadan, Oyo State
    Employment: Not specified
  • Salary: Not disclosed
  • Posted: October 1, 2026
  • Closing date: Not specified
  • Application: Apply through the official FMN recruitment portal.

Key responsibilities:

  • Fabricate, construct, install and repair equipment.
  • Calculate required materials.
    Prepare components for welding.
  • Select appropriate welding equipment and methods.
  • Perform manual or semi-automatic welding.
  • Repair machinery and metal components.
  • Inspect welded surfaces and structures for defects.
    Maintain tools and equipment safely.

Requirements:

  • OND, NABTEB, C&G or WAEC Technical qualification in a relevant discipline.
  • Minimum of two years’ relevant experience, preferably in manufacturing, production or FMCG.
  • Good communication, teamwork and material-management skills.

3. Mechanical Technician – B2C

  • Employer: Premium Edible Oil Products Limited – Flour Mills of Nigeria Plc
  • Location: Ibadan, Oyo State
  • Employment: Not specified
  • Salary: Not disclosed
  • Posted: October 1, 2026
  • Closing date: Not specified
  • Application: Apply through the official FMN recruitment portal.

Key responsibilities:

  • Maintain valves, pressure gauges, motors and pumps.
  • Perform routine lubrication of mechanical equipment.
  • Conduct checks on pumps, bolts, nuts and moving parts.
  • Respond to abnormal equipment conditions.
  • Carry out preventive and corrective maintenance.
  • Follow workplace safety and food-safety procedures.

Requirements:

  • Trade Test 1, 2 and 3.
  • Minimum of three years’ mechanical-maintenance experience, preferably in manufacturing, production or FMCG.
  • Ability to work safely and effectively in a fast-paced environment.

4. Mechanical Fitter – B2C

  • Employer: Premium Edible Oil Products Limited – Flour Mills of Nigeria Plc
  • Location: Ibadan, Oyo State
  • Employment: Not specified
  • Salary: Not disclosed
  • Posted: October 1, 2026
  • Closing date: Not specified
  • Application: Apply through the official FMN recruitment portal.

Key responsibilities:

  • Lubricate pumps, gearboxes and couplings.
  • Inspect machinery for alignment and faults.
  • Read and interpret technical drawings.
  • Fit and assemble metal parts.
    Install gears, pumps, motors and hydraulic assemblies.
  • Inspect completed work and maintain tools.

Requirements:

  • National Diploma in Mechanical Engineering or a related technical field.
  • At least two years’ relevant experience, preferably in manufacturing, production or FMCG.
  • Good organisation, accountability, communication and teamwork skills.

5. Lubrication Technician – B2C

  • Employer: Premium Edible Oil Products Limited – Flour Mills of Nigeria Plc
  • Location: Ibadan, Oyo State
  • Employment: Not specified
  • Salary: Not disclosed
  • Posted: October 1, 2026
  • Closing date: Not specified
  • Application: Apply through the official FMN recruitment portal.

Key responsibilities:

  • Carry out scheduled equipment lubrication.
  • Select the correct lubricant, grade and quantity.
  • Replace and filter oils and greases.
  • Take oil samples for analysis.
  • Identify leaks, contamination and abnormal wear.
  • Maintain lubrication records.
  • Support investigations into equipment failures.

Requirements:

  • OND/HND in Mechanical
  • Engineering or a related technical field.
  • At least three years’ relevant experience, preferably in manufacturing, production or FMCG.
  • TPM and ISO related certifications are an advantage.

Important: FMN’s official recruitment portal lists these vacancies and states that the company does not request applicants to pay money or provide items of monetary value as part of recruitment.

SEE ALSO: Human Resources Companies in Nigeria 

Types of Skilled Trade and Artisan Jobs in Nigeria

Nigeria’s occupational framework includes a wide range of practical careers within a variety of vocational frameworks. Examples of skilled trade and artisan jobs in Nigeria include the following:

  • Electrical: electricians, electrical installers and electrical maintenance technicians
    Mechanical: mechanics, mechanical fitters and maintenance technicians
  • Metalwork: welders and fabricators
  • Construction: bricklayers, blocklayers, tilers, painters and finishers
  • Plumbing: plumbers and pipe-fitters
  • Automotive: automobile mechanics, auto electricians, motorcycle and tricycle repairers
  • Energy: solar PV installation and maintenance technicians
  • Refrigeration: refrigeration and air-conditioning technicians
  • Woodwork: carpenters, joiners and furniture makers
  • Fashion: tailors and leather workers
  • Agriculture: agricultural equipment technicians and other practical agricultural occupations

The Federal Ministry of Education’s current TVET initiative lists specific trades including electrical installation, welding and fabrication, plumbing and pipe-fitting, automobile mechanics, refrigeration and air-conditioning, carpentry and joinery, furniture making and solar installation, among several other practical occupations.

Skills, Qualifications and Certification for Artisan Jobs

The qualification required for a given occupation will depend upon the occupation and employer.

Some positions accept apprenticeship or trade-test qualifications whereas others require OND/HND or specialised technical credentials.

In terms of Nigeria’s NSQ system, it is competency-based and assesses both practical performance and knowledge. NBTE states that NSQs can be attained by employed, unemployed, underemployed and apprenticeship candidates, with no minimum academic entry requirement for NSQ generally.

In terms of artisans and craftsmen, the Federal Ministry of Labour and Employment’s Skills Development and Certification Department is responsible for trade testing, certification, training and retraining.

By trade, useful qualifications may include:

  • Trade Test certificates
  • NABTEB qualifications
  • Technical college qualifications
  • NSQ qualifications
  • OND/HND technical qualifications
  • Relevant occupational or industry certifications
  • Apprenticeship and documented practical experience

Where Skilled Tradespeople Can Find Work in Nigeria

Skilled workers can find employment across a variety of sectors and industries including construction, manufacturing, agriculture, energy, facilities management, automotive services, hospitality, telecommunications and other industries.

Industrial employers frequently require electricians, welders, fitters, mechanics and maintenance technicians to ensure machinery and production systems continue to operate. There are recent employment from companies like FMN and Dangote within manufacturing and industrial maintenance.

Opportunities are also available through government employment and training systems. The National Electronic Labour Exchange (NELEX) administered by the Federal Ministry of Labour and Employment lists vacancies including electrician and plumber positions.

Training, Apprenticeships and Career Development for Artisans

Apprenticeship continues to remain an important career entrance route for practical occupations, whereas formal technical and vocational training can offer additional certification and career progression.

The Federal Ministry of Education’s TVET Initiative currently offers training in electrical installation, welding, plumbing, automobile mechanics, refrigeration, carpentry and solar installation.

The programme states that selected training is tuition-free and may accommodate monthly stipends and start-up support.

Prospective trainees should verify if a training centre is properly recognised. NBTE provides information on approved occupational standards and training-centre pathways through its TVET and NSQ systems.

How to Find and Apply for Skilled Trade Jobs in Nigeria

A strong application should demonstrate your trade experience, qualifications and technical skills.

Before applying:

  • Prepare a CV that highlights your specific trade and practical experience.
  • List relevant Trade Test, NABTEB, NSQ or technical qualifications.
  • Describe the equipment, tools and systems you can operate and maintain.
  • Include relevant work experience and major duties performed.
  • Where appropriate, keep photographs or a portfolio of completed work.
  • Apply through the employer’s official recruitment channel whenever possible.
  • Never pay a recruiter to secure a job unless clearly documented.
  • Recheck the vacancy status before submitting your application.

For skilled trade Jobs in Nigeria, it is important to demonstrate practical competence. Employers may assess your ability to safely perform the actual work in addition to reviewing your certificates and employment history.

Conclusion

Skilled trade and artisan jobs are a good opportunity for those interested in working in Nigeria’s construction, manufacturing, energy, automotive, agricultural and other industrial sectors.

Applicants should strive to acquire skills and competencies to increase their chances of finding employment. It is necessary to apply to job openings from trusted spares and government agencies and not fall victim to scammers who ask for money.

With the right skills and qualifications, it will be possible to find a salaried and self-employed job in these industries.

Related Post
DISCLAIMER: Jobminda.com provides you the latest update on career opportunities and do not offer jobs to individuals. Our team will not request for money or involve trade by bater, always go to the official website for more. All Names and Trademark belong to the rightful owners and should be treated appropriately.

About Sylvester Victor

A Founder and publisher at jobminda.com with over five years of experience. He is a Tutor from Akwa Ibom State, Nigeria with a Bachelor's degree in Electrical and Electronic Engineering.

View all posts by Sylvester Victor →

Leave a Reply

Your email address will not be published. Required fields are marked *